Operators and Maintenance Manual
Valtra T Series Active Tractor
Valtra T144 A
Valtra T154 A
Valtra T174e A
Valtra T194 A
Valtra T214 A
Valtra T234 A
421 pages
Language: English
You will receive the downloadlink of the digital manual (pdf) in your email account after your payment
Contents:
About this manual
Tractor serial numbers
1 Safety precautions
1.1 Hazard statements
1.2 Safety rules
1.2.1 Replacing safety and information signs
1.2.2 Safety signs
1.2.3 Maintaining hardware safety
1.2.4 Using safety features
1.2.5 Safe operation
1.2.5.1 Following safe operating practices
1.2.5.2 Getting into and out of the cab
1.2.5.3 Driving on public roads
1.2.5.4 Controlling the driving speed
1.2.5.5 Driving downhill
1.2.5.6 Permitted driving inclinations
1.2.5.7 Operating with implements
1.2.5.8 Running with power take-off driven implements or machines
1.2.5.9 Using ballast weights
1.2.5.10 Towing
1.2.5.11 Ensuring personal safety of other people
1.2.5.12 Fire hazards
1.2.5.13 Handling viton seals subjected to high temperatures.
1.2.5.14 Aftertreatment system
1.2.5.15 Repair and maintenance
2 Instruments and controls
2.1 One-key locking system
2.2 Pedals
2.3 Dashboard
2.4 Control panel for A-pillar display and Proline
2.5 Proline instrument panel
2.5.1 Symbols on the Proline instrument panel display
2.5.2 Indicator lights on the left side of the display
2.5.3 Indicator lights on the right side of the display
2.6 Controls on the right-hand side
2.6.1 Driving controls
2.6.2 Linkage
2.6.2.1 Rear linkage
2.6.2.2 Front linkage
2.6.3 Power take-off
2.6.3.1 Rear power take-off
2.6.3.2 Front power take-off
2.6.4 Auxiliary hydraulics
2.6.5 Other controls
2.6.6 Main power emergency button
2.7 Controls on the rear side
2.7.1 Rear window opening latch
2.7.2 Additional wipers
2.7.3 Rear drive pedal
2.8 Controls on the left-hand side
2.9 Controls on the right-hand side roof console
2.10 Controls on the Skyview equipment right-hand side roof console
2.11 Working light controls
2.12 Air conditioning controls
2.12.1 Automatic air conditioning and additional heater controls
2.12.2 Manual air conditioning and additional heater controls
2.12.3 Manual air conditioning
2.12.4 Heater controls
2.13 Operator's seat
2.13.1 Basic operator's seat
2.13.2 Air suspended operator's seat
2.14 Controls on the rear mudguard
2.15 Front end controls and connections
2.16 Rear controls and connections outside the cab
3 Operation
3.1 Running the tractor in
3.2 Preparing for use
3.2.1 Adjusting the driver's seat
3.2.2 Adjusting the air-suspended driver's seat
3.2.3 Adjusting the steering wheel
3.2.4 Adjusting standard mirrors
3.2.5 Adjusting optional mirrors
3.2.6 Heating mirrors
3.2.7 Using the windscreen wiper and washer
3.2.8 Using the side window wiper and washer
3.2.9 Using the rear window wiper and washer
3.2.10 Using the roof window wiper and washer
3.2.11 Using the window heaters
3.2.12 Power shuttle lever
3.2.13 Control stop
3.2.14 Using the control stop
3.2.15 Using the ignition switch
3.2.16 Main power
3.2.17 Using the main power emergency button
3.2.18 Using the roof hatch
3.3 Starting the tractor
3.3.1 Starting under normal conditions
3.3.2 Starting under cold conditions
3.3.3 Starting with an auxiliary battery
3.4 Using lights
3.4.1 Using the light switch
3.4.2 Using the follow-me-home functionality
3.4.3 Using the working lights
3.4.4 Using the cab light
3.4.5 Using the torch
3.5 Using notification devices
3.5.1 Using turn signals
3.5.2 Using the horn
3.5.3 Using the rotary beacon light
3.5.4 Using hazard lights
3.6 Heating and ventilation
3.6.1 Using the heater
3.6.2 Using the manual air conditioning
3.6.3 Using the manual air conditioning and additional heater
3.6.4 Automatic air conditioning
3.6.4.1 Automatic air conditioning control panel and display
3.6.4.2 Using the automatic air conditioning
3.6.4.3 Using ECO mode
3.6.4.4 Using the additional heater
3.6.4.5 Using defrost
3.6.5 Fuel-operated heater
3.6.5.1 Installing SIM card to the mobile controlled heater
3.7 Power outlets
3.7.1 Lighter and power outlets
3.7.2 Using the two-pin current socket and power switch
3.7.3 Three-pin current socket
3.7.4 Trailer socket
3.8 Driving the tractor
3.8.1 Notifications about steering
3.8.2 Power shuttle
3.8.3 Parking brake
3.8.4 Using the power shuttle lever
3.8.5 Adjusting the power shuttle engagement speed
3.8.6 Clutch pedal
3.8.6.1 Using the clutch pedal while driving
3.8.6.2 Adjusting the clutch pedal engagement position
3.8.7 Braking
3.8.8 Using the emergency brake button
3.8.9 Using the emergency brake lever
3.8.10 Starting to drive
3.8.11 Transmission system
3.8.11.1 Speed matching
3.8.11.2 Selecting the speed range
3.8.11.3 Selecting the creeper speed range
3.8.11.4 Using Powershift
3.8.11.5 Preprogramming gear for driving direction changing
3.8.11.6 Using the shifting automatics
3.8.11.7 Programming shifting automatics
3.8.11.8 Activating and deactivating automatic shifting between speed ranges C and D
3.8.12 Using the EcoPower mode
3.8.13 Parking the tractor
3.8.14 Refuelling the tractor
3.8.14.1 Filling the fuel tank
3.8.14.2 Filling the AdBlue/DEF tank
3.8.15 Cruise control
3.8.15.1 Cruise control buttons
3.8.15.2 Programming the engine speed cruise control
3.8.15.3 Activating and deactivating the engine speed cruise control
3.8.16 Automatic traction control
3.8.17 Front axle suspension and cab suspension
3.8.17.1 Front axle air suspension
3.8.17.2 AutoComfort cab suspension
3.8.18 Differential lock
3.8.18.1 Differential lock
3.8.18.2 Engaging and disengaging the differential lock
3.8.19 Four-wheel drive
3.8.19.1 Four-wheel drive
3.8.19.2 Engaging and disengaging the four-wheel drive
3.8.20 Driving start automatics
3.8.20.1 Driving start automatics
3.8.20.2 Activating and deactivating the driving start automatics
3.8.20.3 Setting the driving start automatics
3.8.21 QuickSteer
3.8.21.1 QuickSteer
3.8.21.2 Using QuickSteer
3.8.21.3 Resetting QuickSteer
3.8.22 HillHold
3.8.22.1 HillHold
3.8.22.2 Using HillHold
3.9 Displays
3.9.1 Adjusting display brightness
3.10 Proline instrument panel display
3.10.1 Fixed views
3.10.2 Single-row and two-row views
3.10.2.1 Working time view
3.10.2.2 Battery voltage view
3.10.2.3 Cruise control view
3.10.2.4 Driving speed view
3.10.2.5 Wheel slip view
3.10.2.6 Rear power take-off speed view
3.10.2.7 Front power take-off speed view
3.10.2.8 Engine speed view
3.10.2.9 Fuel consumption views
3.10.2.10 Rear lower links' position view
3.10.2.11 Gearbox temperature view
3.10.2.12 Travel distance and surface area view
3.10.3 Periodical maintenance view
3.10.3.1 Clearing the periodical maintenance view
3.10.4 Resetting views
3.10.5 Changing parameters
3.10.5.1 Activating and exiting the setting mode
3.10.5.2 Changing the parameter value
3.10.5.3 Setting the implement width
3.10.5.4 Changing the hour display
3.10.5.5 Changing the minute display
3.10.5.6 Changing the clock mode
3.10.5.7 Activating the direction indicator buzzer
3.10.5.8 Changing the temperature unit
3.10.5.9 Changing the length unit
3.10.5.10 Changing the volume unit
3.10.5.11 Activating and deactivating the front power take-off speed view
3.10.5.12 Adjusting the display contrast
3.11 A-pillar display
3.11.1 A-pillar display control panel
3.11.2 Drive display
3.11.2.1 Power shuttle section
3.11.2.2 Transmission section
3.11.2.3 General information section
3.11.2.4 Changing general information section views
3.11.3 Driver's settings display
3.11.3.1 Indexes section
3.11.3.2 Adjustable indexes
3.11.3.3 AUTO2 HI and LO sections
3.11.3.4 Speed sensor calibration section
3.11.3.5 I/O test section
3.11.4 Fault code view
3.12 Rear linkage
3.12.1 Diagnostic light
3.12.2 Lifting/lowering indicator lights
3.12.3 Activating the linkage
3.12.4 Using the lift/stop/lower switch
3.12.5 Using the position control knob
3.12.6 Overriding the position set by position control knob.
3.12.7 Using the linkage floating position
3.12.8 Using the lifting/lowering switch
3.12.9 Using the lifting/lowering push buttons
3.12.10 Setting the lowering speed
3.12.11 Limiting the lifting height
3.12.12 Draft control
3.12.12.1 Activating and deactivating the draft control
3.12.13 Drive balance control
3.12.13.1 Using the drive balance control
3.12.14 Slip control
3.12.14.1 Using the slip control
3.13 Three-point linkage
3.13.1 Attaching implements
3.13.2 Using quick couplings for lower links
3.13.3 Adjusting lift links
3.13.3.1 Adjusting lift links
3.13.3.2 Adjusting hydraulic lift link
3.13.4 Adjusting lower links
3.13.5 Adjusting side limiters
3.13.6 Automatic side limiters
3.13.6.1 Setting automatic side limiters to fixed position
3.13.6.2 Setting automatic side limiters to floating position
3.14 Auxiliary hydraulics
3.14.1 Controlling the auxiliary hydraulics rear valves
3.14.1.1 Adjusting the flow control
3.14.1.2 Adjusting the kick-out pressure
3.14.2 Using the front linkage shut-off valve
3.14.3 Connecting to the valves
3.14.3.1 Using quick couplings
3.14.3.2 Using Power Beyond couplings
3.14.3.3 Using a hydraulic valve as a single-action valve
3.14.3.4 Connecting an external hydraulic motor to the auxiliary hydraulics
3.15 Front linkage
3.15.1 Using the front linkage connected to the rear valves
3.15.2 Setting front linkage lifting link positions
3.16 Power take-off
3.16.1 Attaching implements to the power take-off
3.16.2 Rear power take-off
3.16.2.1 Recommended rear power take-off shafts
3.16.2.2 Activating rear power take-off
3.16.2.3 Starting rear power take-off
3.16.2.4 Stopping rear power take-off temporarily
3.16.2.5 Deactivating rear power take-off
3.16.2.6 Stopping the rear power take-off in emergency
3.16.2.7 Using the rear power take-off automatic start/stop
3.16.2.8 Proportional ground speed power take-off
3.16.2.9 Adjusting the rear power take-off engagement
3.16.3 Front power take-off
3.16.3.1 Activating and deactivating front power take-off
3.17 Implement signal connection
3.17.1 Implement signal connector
3.17.2 Resetting the implement signal connection
3.18 ISOBUS implement control system
3.18.1 ISOBUS terminal connector
3.18.2 ISOBUS implement connector
3.18.3 Bus extension connectors
3.18.4 ISOBUS terminal
3.19 Auto-Guide Readiness
3.19.1 Using Auto-Guide
3.19.2 Using Auto-Guide with QuickSteer
3.19.3 Resetting the Auto-Guide steering valve
3.20 Towing devices
3.20.1 Nordic pick-up hitch
3.20.2 Euro pick-up hitch
3.20.3 Hydraulic pick-up hitch
3.20.4 Using the pickup hitch
3.20.4.1 Unlatching the pick-up hitch
3.20.4.2 Latching the Nordic and Euro pick-up hitch
3.20.4.3 Extending the Hydraulic pick-up hitch
3.20.4.4 Latching the Hydraulic pick-up hitch
3.20.5 Changing the pick-up hitch implement
3.20.5.1 Changing the Euro pick-up hitch implement
3.20.5.2 Changing the Hydraulic pick-up hitch implement
3.20.6 Agricultural drawbar
3.20.6.1 Adjusting the agricultural drawbar
3.20.7 Towing device frames
3.20.7.1 Adjusting the jaw height
3.20.7.2 Attaching to the mechanical jaw
3.20.7.3 Attaching to the mechanical jaw K80
3.20.7.4 Attaching to fixed Piton fix/fixed Ø80mm
3.20.7.5 Attaching to the automatic jaw
3.21 Air pressure system
3.22 Trailer
3.22.1 Trailer turn signals
3.22.2 Trailer air pressure brakes
3.22.3 Hydraulic trailer brake valve
4 Maintenance
4.1 Maintenance schedule
4.2 Service inspection
4.3 Performing maintenance tasks
4.3.1 Cleaning the tractor
4.3.1.1 Cleaning the engine compartment
4.3.1.2 Cleaning front axle suspension bellows
4.3.1.3 Cleaning polycarbonate windows
4.3.1.4 Cleaning the exhaust pipe of the fuel-operated heater
4.3.1.5 Cleaning the fuel-operated heater and its surroundings
4.3.2 Greasing lubricating points fitted with grease nipples
4.3.3 Supporting the tractor
4.4 Recommended fuel and lubricants
4.4.1 Fuel
4.4.1.1 Quality requirements for engine fuel
4.4.1.2 Storing fuel
4.4.1.3 Storing AdBlue/DEF
4.4.1.4 Biodiesel fuel
4.4.1.5 AdBlue/DEF
4.4.2 Grease
4.4.2.1 Universal Grease - NLGI2 universal grease
4.4.2.2 Calsium LF - NLGI2 calsium grease LF
4.4.2.3 Grease Moly - NLGI2 moly grease
4.5 Storing the tractor
4.5.1 Storing the tractor for a period shorter than two months
4.5.2 Storing the tractor for a period longer than two months
4.6 Running the tractor in after storage
4.6.1 Running the tractor in after a storing period shorter than two months
4.6.2 Running the tractor in after a storing period longer than two months
4.7 Periodical maintenance
4.7.1 Periodical maintenance chart
4.7.2 Daily maintenance
4.7.2.1 Checking the engine oil level
4.7.2.2 Checking the coolant level
4.7.2.3 Cleaning radiators
4.7.2.4 Checking the oil level in the transmission system
4.7.2.5 Checking the oil level in the hydraulic system
4.7.3 Weekly maintenance
4.7.3.1 Greasing the rear linkage
4.7.3.2 Checking the pick-up hitch
4.7.3.3 Greasing the Nordic and Euro pick-up hitch
4.7.3.4 Greasing the hydraulic pick-up hitch
4.7.3.5 Checking and greasing the front linkage
4.7.3.6 Checking the front power take-off
4.7.3.7 Greasing the brake mechanism
4.7.3.8 Greasing front axle mounting bearings
4.7.3.9 Greasing air-suspended front axle mounting bearings
4.7.3.10 Checking belts' tension
4.7.3.11 Changing the fan and alternator belt
4.7.3.12 Checking the tyre pressure
4.7.3.13 Checking the emergency brake
4.7.3.14 Checking the windscreen washer fluid amount
4.7.3.15 Checking the air pressure system antifreeze fluid amount
4.7.3.15 Checking the air pressure system antifreeze fluid amount
4.7.4 Maintenance every 600 hours
4.7.4.1 Checking, cleaning and greasing the battery terminals
4.7.4.2 Changing the engine oil and the oil filter
4.7.4.3 Changing the cab ventilation air filter
4.7.4.4 Changing the Skyview equipment cab ventilation air filter
4.7.4.5 Changing the recirculation filter
4.7.4.6 Changing the Skyview equipment cab recirculation filter
4.7.4.7 Checking the front loader frame bolt tightness
4.7.4.8 Checking the wheel nut tightness
4.7.4.9 Checking the brake pedal free travel
4.7.4.10 Adjusting the brake pedal free travel
4.7.4.11 Checking the parking brake
4.7.4.12 Adjusting the parking brake
4.7.4.13 Changing transmission oil filters
4.7.4.14 Changing the hydraulic system oil filter
4.7.4.15 Checking the engine breathing system
4.7.4.16 Checking the oil level in the front axle differential
4.7.4.17 Checking the oil level in front axle hubs
4.7.4.18 Changing oil in the hubs of the front axles with brakes
4.7.4.19 Changing the front PTO housing oil and washing the oil filter
4.7.4.20 Checking front PTO couplings
4.7.4.21 Checking and greasing the trailer air-pressure brake system
4.7.4.22 Checking the air pressure system's automatic water draining
4.7.4.23 Filling the air pressure system antifreeze container
4.7.4.24 Adjusting engine valves
4.7.4.25 Updating the software and calibrating the tractor
4.7.5 Maintenance every 1200 hours or yearly
4.7.5.1 Changing oil in the hydraulic system
4.7.5.2 Changing oil in the front axle differential
4.7.5.3 Changing oil in the front axle hubs
4.7.5.4 Changing the fuel filter
4.7.5.5 Changing the fuel prefilter
4.7.5.6 Changing engine air filters
4.7.5.7 Changing the selective catalytic reduction system breather and supply module main filter
4.7.5.8 Checking the front wheel toe-in
4.7.5.9 Adjusting the front wheel toe-in
4.7.5.10 Changing the hydraulic breather
4.7.5.11 Checking the power shuttle operation
4.7.6 Maintenance every 2400 hours or every other year
4.7.6.1 Changing oil in the transmission system
4.7.6.2 Changing the transmission breather
4.7.6.3 Cleaning the suction strainer
4.7.6.4 Bleeding the brake system
4.7.6.5 Bleeding the front axle brake system
4.7.6.6 Cleaning the cooling system
4.7.6.7 Checking the engine vibration damper
4.7.6.8 Maintaining the air conditioning
4.8 Checks and adjustments
4.8.1 Changing tyres
4.8.1.1 Setting the tyre parameter
4.8.1.2 Tyre parameters
4.8.2 Track widths
4.8.2.1 Front axle track widths
4.8.2.2 Rear axle track widths
4.8.3 Using chains
4.8.4 Using twin-mounted wheels
4.8.5 Engine
4.8.5.1 Bleeding the fuel system
4.8.6 Electrical system
4.8.6.1 Safety precautions for the electrical system.
4.8.6.2 Checking the battery
4.8.6.3 Alternator
4.8.6.4 Protecting the electrical system before welding
4.8.6.5 Fuses and relays.
4.8.6.6 Fuses and relays in the cab electric centre
4.8.6.7 Fuses and relays in the roof electric centre
4.8.6.8 Fuses and relays in the Skyview equipment roof electric centre
4.8.6.9 Fuses and relays in the main electric centre
4.8.6.10 Fuses and relays in the engine electric centre
4.8.6.11 Adjusting headlights
4.8.7 Power transmission system
4.8.7.1 Changing the rear power take-off shaft.
4.8.7.2 Checking the transmission ratio of a power take-off driven trailer
4.8.8 Steering system
4.8.8.1 Adjusting the steering angle
4.8.9 Cab and shields
4.8.9.1 Cleaning the cab ventilation air filter
4.8.9.2 Cleaning the Skyview equipment cab ventilation air filter
4.8.9.3 Adjusting steps for driving off-road
4.8.9.4 Checking and adjusting front mudguards
4.8.9.5 Adjusting flexible front mudguards
4.8.10 Auxiliary hydraulics
4.8.10.1 Adjusting the rear valve cables
4.8.11 Towing devices
4.8.11.1 Adjusting lifting links of the pick-up hitch
4.8.11.2 Maintaining the automatic jaw of the wagon towing device
5 Troubleshooting
5.1 Handling error situations
5.2 Warnings on the Proline instrument panel display
5.3 Identifying a blocked transmission or hydraulic system filter
5.4 Viewing service codes
5.5 Viewing the IO list
5.6 Steering system malfunctions
5.7 Towing the tractor
5.7.1 Towing the tractor when the engine is running
5.7.2 Towing the tractor when the engine is not running
6 Technical specifications
6.1 Dimensions
6.2 Masses
6.3 Maximum permissible axle loading
6.4 Technically permissible towable masses
6.5 Tyres
6.5.1 Wheel nut tightening torques
6.5.2 Wheel stud dimensions
6.5.3 Tyre loadings and pressures
6.6 Flange distance for axles
6.7 Track widths
6.7.1 Rear axle track widths
6.7.2 Front axle track widths
6.8 Engine
6.8.1 Engine lubrication system
6.8.2 Fuel system
6.8.3 Selective catalytic reduction system
6.8.4 Air cleaner
6.8.5 Cooling system
6.9 Electrical system
6.10 Power transmission
6.10.1 Power shuttle
6.10.2 Clutch
6.10.3 Gearbox
6.10.4 Rear axle differential lock
6.10.5 Rear power take-off
6.10.5.1 Rear power take-off alternatives
6.10.5.2 Rear power take-off ratios
6.10.5.3 Rear power take-off shafts
6.10.5.4 Lower link end distance from rear power take-off shaft
6.10.5.5 Proportional ground speed power take-off
6.10.6 Front power take-off
6.10.6.1 Front power take-off ratio
6.10.6.2 Front power take-off shafts
6.11 Brake system
6.12 Steering system
6.12.1 Front axle
6.12.2 Turning circle
6.12.3 Front axle suspension
6.13 Cab and shields
6.13.1 Cab filter capacity
6.13.2 Windscreen washer
6.13.3 Air conditioning system
6.13.4 Noise level
6.13.5 Exposure to vibration
6.14 Hydraulic system
6.14.1 Low-pressure circuit
6.14.2 Steering hydraulic circuit
6.14.3 Working hydraulic circuit
6.14.3.1 Valves for auxiliary hydraulics
6.14.3.2 Counter pressure when using the return connection for auxiliary hydraulics
6.14.4 Rear linkage
6.14.4.1 Lifting forces and lifting ranges
6.14.5 Front linkage
6.14.6 Towing devices
6.14.6.1 Pick-up hitch
6.14.6.2 Euro pick-up hitch
6.14.6.3 Hydraulic pick-up hitch
6.14.6.4 Agricultural towing device
6.14.6.5 Towing device frames
Alphabetical index